Marzouk Steel is a reliable manufacturer and supplier of Carbon Steel EN-200 Bars in Tunis, Tunisia, offering quality steel solutions for general engineering and structural applications. EN-200 is a low carbon steel grade known for its excellent ductility, formability, and ease of machining. At Marzouk Steel, EN-200 bars are produced with strict quality standards to ensure uniform composition, smooth surface finish, and consistent performance. Our customer-focused approach, dependable supply chain, and commitment to international standards make EN-200 bars a practical and economical choice for everyday industrial requirements.
Carbon Steel EN-200 Bars typically contain low carbon content with small amounts of manganese and trace elements. This composition results in good ductility, high toughness, and excellent weldability. Mechanically, EN-200 bars offer moderate tensile strength and yield strength, making them easy to form and fabricate. They are well suited for cold working and machining operations, with reliable dimensional stability. Due to their low carbon content, these bars are not intended for high hardness but perform well in non-critical load applications.
Size : 22mm upto 800mm
Thickness : 1-2 inch
Length : 3 meter, 6 meter
Form : Carbon Steel Round, Hex, Flat, Half Round, Oval, Rectangular in Black & Bright Finish
| Grade | C | Mn | Si | S | P | Cr | Ni |
| EN200 | 0.35 – 0.45 | 0.60 – 1.00 | 0.10 – 0.35 | 0.50 max | 0.50 max | – | – |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
| Carbon Steel EN200 | 80(551) | 35 (241) | 30 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
Carbon Steel EN-200 Bars are extensively used in all industries because of their toughness, durability, and machinability. In construction industry, they are employed for structural members, reinforcement bars, and support beams. In automotive industry, they are crucial for the manufacture of engine parts, shafts, and fasteners. EN-200 bars are used in machinery application for gears, tools, and machine parts. In addition, they are also used in rail equipment, agricultural equipment, and fabricating processes due to the fact that they possess excellent weldability and wear resistance. They are ideal to use where toughness, reliability, and low-cost performance under harsh conditions are required.
Marzouk Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Tunis, Tunisia.
Copyright 2025 Marzouk Steel. All rights reserved
